Component and System Testing at the CHARM Mixed-Field Facility – CERN

Talk summary: Electronics systems designed for applications in high radiation environments, such as space missions, high energy accelerators and avionics, are subject to a radiation qualification process at component level which is often time consuming and expensive.

The new CERN High energy AcceleRator Mixed Field facility (CHARM) allows to test several single components, as well as more complex devices, at different locations, characterized by particle spectra representative of the high- and low-altitude atmospheric, particle accelerator and ground environments.

Single Events and TID effects are evaluated through the energy deposition in a certain Sensitive Volume in a broad range of energies (meV to GeV), not often available in other test facilities. COTS components and full systems designed for cryogenics, power converters, radiation monitoring and Nanosatellite applications were successfully tested in a mixed field dominated by Highly Energetic Hadrons.

This radiation qualification process proved to be effective in terms of budget, facility access and time constraints.

Speaker:
Raffaello Secondo received his Master of Science in Electronics Engineering at the University of Genova in 2009. He has worked for 3 years as a controls engineer and beam physicist at the Lawrence Berkeley Laboratory. He joined CERN in 2012 as a Software and Hardware design engineer in the Equipment Controls and Electronics section, mainly working on setup development or radiation tests, design of radiation tolerant systems and radiation hardness assurance of COTS components. Since 2014 he is enrolled in a Ph.D program with the University of Montpellier at CERN, his present focus is the development of the CELESTA Nanosatellite Mission Payload and the optimization of the CERN Radiation Monitoring Systems.

Component and System Testing at the CHARM Mixed-Field Facility – CERN

The CERN high-energy accelerator environment

  • Strong radiation fields generated through:Component and System Testing at the CHARM Mixed-Field Facility – CERN
    • Proton-proton collisions in the interaction points
    • Interaction between the proton beam and collimator-like objects
    • Beam-gas interactions
  • Radiation Effects on Components and Systems: (TID) effect, Displacement Damage (DD), Single Event Effects (SEEs)
  • Radiation Environment simulated using the FLUKA Monte Carlo code.
  • Strong contribution of High Energy Hadrons and thermal neutrons to the SEE rate.

Radiation testing at CERN

  • Typical systems: cryogenics, power converters, vacuum, RF, magnet quench protection…
  • Extensive use of COTS components due to:
    • Availability: highly distributed systems replicated 1000+ times
    • Low cost
    • High (electrical) performance

Strong Radiation Testing Effort

The CHARM Irradiation Area I

Component and System Testing at the CHARM Mixed-Field Facility

The CHARM Irradiation Area II

  • Receives a 24 GeV proton beam from the PSThe CHARM Irradiation Area II
  • Generates a mixed-field through the interaction with a metallic target
  • Different targets, shielding configurations and locations yield a variety of possible environments
  • The Spectra and Intensity of the secondary field depends on the position
  • Energy deposition over a Sensitive Volume

The CHARM Radiation Environment

Component and System Testing at the CHARM Mixed-Field Facility – CERN

 

 

In the downstream locations (10-13)
HEH fluxes of ~1010 cm-2h-1 (roughly one year in the LHC tunnel) can be reached in one hour.

Download or read the full report here

GDE Error: Unable to load requested profile.
Media ATN
Latest posts by Media ATN (see all)