Pulse 1 ISO 7637-1

ISO Pulse Immunity

Alter Technology is qualified to test electrical disturbances by conduction and coupling, in accordance with the ISO 7637-1/2/3 international standards. The test intention is the demonstration of the immunity of the equipment when subjected to coupled fast transient...

Electrical Test Alter Technology

Electrical Tests

Electrical Strength and Insulation Electrical Testing The safety standards include several electrical requirements that are assessed by performing the following tests: Resistance of earthing conductors and their terminations: 1 mW to 1.5W, test current from 5 to 30 Arms. Touch...

Electrostatic Discharges Equipment

Electrostatic Discharges

Alter Technology has an ENAC accreditation to perform electrostatic discharge tests (accreditation number345/LE 808). Basic standard EN 61000-4-2. The objective of these tests is to asses the ability of the EUT (Equipment Under Test) to operate as intended by applying...

surge inmunity test

Surge Immunity Test

The objective of this test is to to evaluate the performance of the EUT (Equipment Under Test) under high-energy disturbances on the power and interconnection lines, the disturbances being caused by overvoltages from switching and lightning transients. We also have the capacity...

Shielded Room

Conducted Emission Tests

ALTER TECHNOLOGY is accredited by ENAC to perform conducted emission tests in accordance with 345/LE 808 accreditation. The objective of this test is to measure the levels of disturbance conducted by electrical and/or electronic equipment through its power supply cables and...

radiated emission-anechoic camera test

Radiated Emission Test

ALTER TECHNOLOGY is accredited by ENAC to perform radiated emission test according to EN 55022:2010/AC:2011, EN 61000-6-3:2007, ETSI EN 301 489-1 / 3 / 5 / 7 / 8 / 11 / 13 and ETSI EN 300 386 v1.6.1:2012-09

Immunity

Electrical Fast Transients/Burst

ALTER TECHNOLOGY is accredited by ENAC to perform Electrical Fast Transients (EFT)/Burst tests according to EN 61000-4-4:2004/AC:2010, EN 55024: 2010, EN 61000-6-1:2007, EN61000-6-2:2005, ETSI EN 301 489-1 / 3 / 5 / 7 / 8 / 11 / 13, ETSI EN 300 386 v.1.6.1:2012-09 and EN 50130...