Conducted Susceptibility Tests

ALTER TECHNOLOGY has proven capabilities in EMC testing in accordance with MIL-STD 461E and MIL-STD 462F.
Conducted Susceptibility tests are used to verify the ability of the EUT (Equipment Under Test) to withstand signals coupled onto input power leads.
• CS101 Conducted Susceptibility, Power leads
• CS103 Antenna Port, Intermodulation
• CS104 Antenna Port, Undesired Signals
• CS105 Antenna Port, Cross-modulation
• CS109 Structure Current
• CS114 Bulk Cable Injection
• CS115 Bulk Cable Injection, Impulse Excitation
• CS116 Damped Sinusoidal Transients
Radiated Susceptibility tests are used to verify the ability of the EUT and associated cabling to withstand radiated magnetic electric and transient electromagnetic fields.
• RS 101 Radiated Susceptibility, Magnetic Field
• RS 103 Electric Field
• RS105 Transient Electromagnetic Field
Our testing capacity covers Conducted Susceptibility, Bulk Cable Injection, Damped Transients, Radiated Susceptibility – Electric Field to 18 GHz and 60V/m (anechoic chamber) and 200V/m (GTEM chamber) – Magnetic Field from 20Hz to 100kHz between 180dBpT and 116dBpT.

ALTER TECHNOLOGY TESTING FACILITIES
• 2 semi-anechoic chambers (Ray Proof and Euroshield)
• Control room (Ray Proof)
• GTEM EMCO 1750
• Antennae and electric field probes
• RF generators
• RF power amplifiers
• Spikes generator
• Audio generator
• Transient generator
• Audio amplifiers
• EM and current clamp
• Current probe
• Coupling Network
• LISNs
• Current amplifiers
• Susceptibility system CWS500
• Single phase power frequency test systems Haefely Trench PHF555
• California power system
• Helmholtz coil