Alter Technology (formerly Optocap), is a leader in the design, manufacture and test of High Reliability Micro and Optoelectronics modules for Harsh Environments. We have experience in a number of high reliability and harsh environment markets such as Aerospace & Defence, Space...
In order that you can analyze the impact on the certificates of electronic security products, attached you can see a document with information about Standards updates applicable to some of these products. The document indicates both the date on which the old version stops...
EMC Directive 2014/30/EU The Certification Body of ALTER TECHNOLOGY TÜV NORD has been designed notified body for the new EMC Directive 2014/30/EU (in force since 19th April, 2016) by the State Secretariat for Telecommunications. ALTER TECHNOLOGY has capacity to carry out...
CE marking of complex systems presents certain difficulties that require a solid expertise in order to achieve the objective without jeopardizing the time-to-market and increasing the cost of the solution.
The RTCA DO-160 standard (Environmental Conditions and Test Procedures for Airborne Equipment), defines a series of minimum test conditions and applicable test procedures for commercial airborne equipment.
ALTER TECHNOLOGY has proven capabilities in EMC testing in accordance with MIL-STD 461E and MIL-STD 462F. Conducted Susceptibility tests are used to verify the ability of the EUT (Equipment Under Test) to withstand signals coupled onto input power leads. • CS101 Conducted...
Electromagnetic compatibility testing in accordance with the MIL-STD-461 E/F, MIL-STD-461, EN 61326-1, Safety testing in accordance with EN 61010-1 and Environmental testing in accordance with MIL-STD-810 F/G/G.
European regulations require that fire control products be CE marked to show compliance with the applicable European Directives. The directives applicable to these products are the following: EMC Directive, 2004/108/CE (2014/30/EU from 2016/04/20) Low Voltage Directive...
Alter Technology is qualified to test electrical disturbances by conduction and coupling, in accordance with the ISO 7637-1/2/3 international standards. The test intention is the demonstration of the immunity of the equipment when subjected to coupled fast transient...
Performing an environmental test means subjecting the device or system to certain environmental conditions (cold, dry heat, relative humidity, etc.) in order to check if the operational parameters remain within the range defined by the applicable regulations. Sometimes it is...
Electronic components are the basic constitutive elements of every electronic equipment or system and as such determine the final characteristics of the product. Electromagnetic compatibility is the ability of a device or system to properly function in its electromagnetic...
The purpose of the radio systems tests is to verify the compliance with the protection requirements for the use of the radio-electric spectrum established by the European Directive 1999/5/CE R&TTE on radio-electric equipment and telecommunications terminals. We can test to the...
